Hydrosteel 6000 Technical Specifications

Hydrosteel 6000 Technical Specifications
Intrinsically safe approvals	II 2 G EEx ia II T4 Baseefa 02ATEX0093
Measurement principle	Hydrogen collection and analysis
Operation	Battery: 4 x alkaline AA, typically 30 hours
Sensitivity	1 pL/cm²/s (note 1 pl = 10^-12 liters at s.t.p)
Range	0 to 15000 pL/cm²/s
Accuracy	10% logged reading resolution
Response	T90 = 40 seconds
Data logging	Over 40,000 data points with time and date stamp
Temperature	Analyser: -20 to 50 °C (-4 to 122 °F) LT-R probe: Steel surface up to 130 °C (266 °F) HT-R probe: Steel surface up to 500 °C (930 °F) AT-S probe: Steel surface up to 500 °C (930 °F) HT-S probe: Steel surface up to 500 °C (930 °F) Storage <20 °C, <70 °F
Dimensions	Analyser: 340 x 60 x 50 mm (13.5 x 2.3 x 1.9") LT-R and AT-S probes: 15 cm, 6" diameter HT-R and HT-S probes: 5.7 cm, 2.25" diameter
Weight	Analyser: 0.45 kg (1 lb) LT-R probe: 14 oz (397 g) HT-R probe: 11 oz (312 g)
EMC tested	To EN50081-1 & EN50082-1 July 98

1pL is equal to 10ֿ¹² litres, calibrated at 1 bar and at 20ºC, 70ºF

All Hydrosteel equipment is factory calibrated. ION Science Ltd recommends the instrument and challenge kit be calibrated yearly. To ensure that analyser flow, pneumatic performance and hydrogen measurement are within specifications a function test using the Function Test Kit (Part No A-40107) unit is recommended.

Please note: the function test does not re-calibrate the instrument.