Ion Science History Time Line

2016

Ion Science launches Falco, our fixed VOC monitor with ‘typhoon’ technology specifically designed for extreme weather and condensing atmospheres. We also launch our MiniPID 2 sensor, our best photoionisation detection (PID) sensor technology yet! 2016 also sees Titan achieve North American and Canadian safety standards.

2015

Ion Science set up an in-house printed circuit board (PCB) department as part of an on-going investment programme designed to support further growth. This latest initiative is set to strengthen product quality, increase production efficiencies and shorten lead times.

Ion Science Italy opens! 2015 sees the set-up and introduction of an office in Bologna, Italy.

Ion Science launches Tiger LT, a low-cost variant of our hugely popular Tiger handheld VOC detector. Tiger LT is awarded product of the year by Occupational Health & Safety magazine.

Work commences on-site for a new, eco-friendly building for Ion Science.

2014

The launch of the Titan, a fixed benzene-specific monitor takes place and is set to revolutionise the petrochemical industry. Ion Science turns 25 years old and celebrates the milestone by taking employees on a river boat cruise on the river Thames!

2013

Ion Science opens its second office in the USA based in Stafford, Texas, and relaunches as Ion Science Inc. 

Ion Science introduces Gascheck Tesla, a helium leak detector for use within a high magnetic field. Tiger attains NATO stock number for use in VOC monitoring.

2012

Ion Science launches the Cub personal VOC monitor, the world’s smallest, lightest, most sensitive PID detector on the market.

2011

Ion Science launches the revolutionary Tiger Select for the detection of benzene and total aromatic compounds (TACs).

2010

Our TVOC fixed continuous VOC detector is certified with ATEX approvals to enable a 3 wire system to be used in Zone 2 hazardous areas, without safety barriers.

Ion Science launches the portable MVI mercury vapour detector to international markets.

Ion Science receives independent verification for best performing PID technology from the state of Maine Department of Environmental Protection (ME DEP). Findings of an evaluation prove Ion Science PID technology outperforms its competition.

The revolutionary handheld Tiger VOC detector is launched into global markets.

2009

Ion Science launches a continuous ground gas monitor, the world’s first in-situ mobile ground gas monitor for detecting CH4, CO2, O2, H2S, CO and VOCs.

2008

IECEx (ATEX) certification is received on our MiniPID miniature photoionisation detection sensor technology.

Ion Science complete negotiations to purchase Shawcity Ltd, our exclusive UK Distributor.

2007

The launch of our first 4 series photoionsation detection (PID) sensor known as MiniPID is launched to the OEM gas detection market.

2006

Ion Science is awarded a patent for our Fence Electrode Technology featured found within our MiniPID sensor and across our range of VOC detectors. Fence Electrode Technology gives us the competitive edge with its resistance to humidity and contamination.  

2005

Ion Science Messtechnik launches an SF6 LeakCheck P1:p with high sensitivity and response of less than 1 second to even the smallest of leaks (1 x 10-7).

The PhoCheck+ handheld VOC detector is launched with new, significantly improved features.  The FirstCheck 4000 is added to the range of FirstCheck multi-gas VOC detectors.

TVOC is launched as a fix continuous VOC detector using ION science’s 7 series PID sensor developed with BW technology.

2004

FirstCheck 6000 is launched for the first response market in the US. It’s the first PID instrument to combine complete multi-gas detection from ppb levels up to 10,000 ppm combined with traditional multi-gas sensors for oxygen (O2), hydrogen sulphide (H2S), carbon monoxide (CO) and explosive gas (LEL) detection.

In addition, Hydrosteel 7000 is launched; this product is a fixed, totally non-intrusive device for the continuous monitoring of hydrogen flux corrosion at high criticality sites within petrochemical, gas production and petrochemical refining operations.

2003

Ion Science launches the PhoCheck 1000, a simple VOC detector for entry into the PID market.

A smart award is received for the development of a permanent Hydrosteel monitoring system after the success of the portable device.

PhoCheck 2000, 3000 and 5000 re-launched with a graphical format.

ISO 9001:2000 certification is achieved.

2002

Dr. Frank Dean joins the Board of Directors, after six valuable years of service as a Research Manager. Together with Mark Stockdale and Duncan Johns they purchase the controlling interest in the company.

Ion Science America’s is formed with Mr. Geoff Hewitt as CEO, a former VP of Sales and Marketing for HNU. HNU was the very first PID Company founded in the early 1970’s.

A worldwide patent on PID Fence Electrode was applied for, giving low-level stability in volatile organic compound (VOC) and relative humidity (RH) atmospheres.

2001

The PhoCheck range of VOC detectors is extended with two new models; the 2000 and 3000 Ex. In addition, a new calibration device called the CalCheck is launched for easy calibration of gas leak detectors.

Ion Science develops a new high-temperature collector that wins the company a Smart Award to explore the potential of a development for detecting corrosion under insulation.

2000

Ion Science launches the PhoCheck 5000 Ex, the company’s first PID instrument that detects volatile organic compounds (VOCs) down to parts per billion (ppb) levels.  Also launched this year is the Hydrosteel corrosion monitor, the world’s first truly portable hydrogen permeation in steel analyser, for the Oil and Gas industry.

1999

Duncan Johns joins the company as Managing Director, taking over from Mel Vinton. With a wealth of international sales and management experience within the gas detection industry, Duncan joins to strengthen the management team and increase sales internationally.

Ion Science Messtechnik launches the GasCheck P1 SF6. Ion Science also launches GasCheck 3000 and GasCheck 5000, replacements to the GasCheck B and B4 IS series.

1996

Ion Science receives a patent for a hydrogen permeation system, and also introduces the first of our photoionisation detection (PID) technology. The PIDs, with development from Mark Stockdale, were successfully integrated into the Systems Division for leak testing applications.

1995

Dr. Frank Dean joins as Research Manager. Frank, an Electrochemist, and specialist in gas sensing technology was tasked to develop and innovate our technologies allowing us to further develop our sensors, products, and expertise within this field.

1993

Ion Science Messtechnik is formed in Dusseldorf with Clemens Verley as the Managing Director. The company is set up to re-sell Ion Science Ltd’s products and develop leak-testing systems for the automotive market in Germany.

1991

GasCheck B4 IS was introduced as the world’s first Intrinsically Safe leak detector for hydrogen and granted BASEEFA and CENELEC approvals.

Ion Science was selected as the main supplier for all radiator leak test machines for Ford (UK) Motor Company.

Ion Science gains the quality status of ISO9002.

1990

Ion Science launches the first GasCheck B3 and B4 leak testing instrument. GasCheck B3 and B4 is highly sensitive to helium, and many other gases, for testing manufactured parts and vacuum systems for the smallest of leaks.

1989

Ion Science was founded in 1989 by Mr. Mark Stockdale and Mr. Mel Vinton. The first in the range of Ion Science products was developed, The Saga Flow Meter. The Saga Flow Meter was manufactured using the first principle of operation; bubbles with a light sensor.