Tiger Select – Benzene & Total Aromatic Compounds in one Instrument

The Tiger Select is revolutionary hand-held gas detector with two mode operation for the rapid detection of benzene and Total Aromatic Compounds (TACs) providing accurate, reliable data you can count on.

Utilising the high output Ion Science 10.0eV detection system, a reading for Total Aromatic Compounds (TACs) is seen immediately on start-up. Should aromatics be detected, a Draeger benzene pre-filter tube can be easily attached to ensure rapid detection and selective measurement of benzene.

Throughout the measurement process, Tiger Select continues to display real time data, ensuring the final reading represents the full value of actual benzene present. Benzene concentrations are displayed down to ppb levels, giving you the most accurate, reliable data you can count on.

Tiger Select is capable of providing 15 minute STELs and 8 hour TWAs for TACs. A 10.6 eV lamp can easily be installed for the detection of a wide range of TVOCs.

In addition, the unique MiniPID VOC sensor incorporates both Anti-contamination technology and Fence Electrode technology for extended operation in difficult working environments.

Tiger Select can also be used in standard PhoCheck Tiger operational mode without the use of a benzene pre-filter tube to deliver active indications of VOCs, including benzene at concentrations as low as 1 ppb benzene equivalent. For more information see the PhoCheck Tiger Brochure or webpages.

Key Benefits

• Immediate results on start up - no need to wait for readings
• Fast to detect Total Aromatic Compounds (TACs)
• Detects benzene in other compounds with selective Draeger Benzene pre-filter tube
• Also detects benzene without the need for a specific tube in areas of benzene gas only
• Detects down to ppb levels
• Continuous readings shown on display until max level is reached
• Independently verified as best performing PID technology

Key Features

• Exceptionally easy-to-use and intuitive software
• Large, clear backlit display and keypad
• Easy to operate even when wearing thick gloves
• Lightweight enabling easy one-handed operation

Versatility

• Rugged design to withstand the harshest environments
• Backlight responds to ambient light conditions
• Battery life up to 24 hours

li

Resolution
10 ppb or 0.033 mg/m3 benzene

Maximum Reading
40 ppm or 130 mg/m3  benzene in tube mode
At least 4000 ppm in TAC mode

Accuracy
±10% display reading ± one digit benzene    

Linearity
± 5% to 40 ppm benzene

Response Time
120 seconds. Progressive indication of benzene breakthrough is displayed in real time

Intrinsically Safe Approvals
II 2G Ex ia IIC T4  (- 15 0C ≤Ta ≤+60 0C)
ITS09 ATEX 26890X
IECEx ITS 10.0036X
US and Canadian approved

Battery Life
Li-ion: life up to 24 hours, charge time 6.5 hours
Alkaline: 3 x AA, up to 8.5 hours life

PID Lamps
Kr PID lamp with 10.0 eV filter pellet

Data Logging
> 120,000 data log points including date and time stamp

Communication
Direct USB 1.1

Calibration
2 and 3 point calibration (Via calibration kit accessory?

Alarm
Flashing LED’s Amber (low alarm) Red (high alarm)
Sounder 95 dBA at 300mm (12”) Vibration on alarm
Pre-programmed TWA and STEL*

Flow Rate
220 ml/min (150 cc/min flow alarm)

Temperature
Operating: -20 to 60 0C, -4 to 140 0F (non Intrinsically Safe)
Humidity: 0-99% RH (non condensing)

Protection
Designed to IP65 (heavy rain)
1180
EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A

Weight & Dimensions
Instrument (probe fitted, no tube attached)
Length: 465 x Height: 89 x Depth: 61 mm (18.3 x 3.5 x 2.4”)
Standard case
Packed weight: 5 kg (176 oz)

Typical Applications

• Total Aromatic Compounds (TAC) detection at loading docks and barge operations
• Confined space entry pre-screening during refinery and plant maintenance screening during refinery and plant maintenance
• Refinery down-stream monitoring
• Hazardous material response
• Marine spill response

Downloads

The following Tiger Select documents can be downloaded below. To obtain hard copies of any of the items, please email info@ionscience.com

• Brochure: Tiger Select V1.3
• Manual: Tiger Select V2.1
• Manual: PhoCheck Tiger 2.6

Please note you will need to download both technical manuals above for full Tiger Select information.

Papers

A number of Tiger Select papers are available below for download:-

• Detecting benzene in refinery atmospheres. Download
• Ion Science photoionisation detection (PID) technology has been independently verified as best performing for fastest response and most accurate readings, whilst effectively minimising humidity and contamination effects. Download

Accessories

The following accessories are available for the Tiger Select. For further information or pricing please contact Ion Science or your local Distributor.

What’s included

Ion Science provides a range of Tiger Select kits to suit your requirements, along with an exclusive range of accessories. Further details can be found below. For more information and prices contact Ion Science or your local Distributor.

Tiger Select Kit  Contains:

• PhoCheck Tiger Select Instrument
• Rechargeable Battery (Li-ion)*
• Battery Charger and Mains Adaptor*
• Rubber Boot
• Explorer Case
• USB Memory Stick
• Draeger Benzene Pre-Filter Tubes
• Pellet Pack PPB (use only in non Select applications)
• Tiger Select Manual
• Tiger Select Quick Start Guide
• Draeger Benzene Pre-Filter Tube Opener
• Carbon Filter Assembly
• PTFE Filter Discs
• Removable Tool for MiniPID Stack
• Carbon Filter Adaptor
• Sample Cleaning Compound
• Lanyard
• Calibration Adaptor
• Sensor Seal - Coated
• Tiger Select Calibration Connector
• O-ring
• Electrode Stack

*Only included with the Rechargeable Tiger Select.